Dryers for compressed air circuits: refrigeration, adsorption, membrane dryers

The water in the compressed air represents the major pollutant because it is present in abundance in all installations. Compressed air dryers help eliminate it. You will find below our different ranges of dryers.

 

Recherchez un élément de filtre adaptable

par Ref. boitier de filtre, Ref. origine de l'élément

Dryers fall into 3 categories:

REFREGIRATION DRYERS

ADSORPTION DRYERS

MEMBRANE DRYERS

Dry compressed air is essential !

Where does the water come from?

It comes from the water vapor naturally present in the ambient air. Sucked with air by the compressor, it is found - like other pollutants - concentrated according to the compression rati...

Dryers fall into 3 categories:

REFREGIRATION DRYERS

ADSORPTION DRYERS

MEMBRANE DRYERS

Dry compressed air is essential !

Where does the water come from?

It comes from the water vapor naturally present in the ambient air. Sucked with air by the compressor, it is found - like other pollutants - concentrated according to the compression ratio. The cooling of the compressed air causes this moisture to condense and appear as liquid water.

How much?

At the average atmospheric conditions prevailing in France, a 100 m3 / h compressor will "produce" 6.5 liters of condensate in 8 hours.

Dry... yes but how far?

The degree of drying depends on the intented use and the configuration of the site. It is expressed in dew point under pressure. You can download HERE the dew point table.

ISO quality class

The ISO 8573-1 standard defines the quality classes for the residual water content. See ISO for: RESIDUAL WATER

What compressed air dryer technology?

By refrigeration, by adsorption or by membrane, each compressed air dryer technology meets specific needs. In the right column you will find a detailed description of each series of dryers in our catalog. Our technicians are on hand to advise you on the right dryer for your application

Read more
  • Refrigerated compressed air dryers

    • More informations
      EVOlution The ACT-EVO series compressed air refrigerated dryers allow for an under pressure dew point of +3ºC, which suits most industrial installations.Designed using the best technologies, the ACT-EVO series dryers stand out of the market alternatives.With its integrated aluminium close-coupled heat exchanger, it was developped specifically for this...
      See product sheet
    • More informations
      New refrigerant with low climatic impact: R 513 A Designed and developed on the basis of the ACT-EVO dryers, the new EVO-BLUE range provides the answer to environmental concerns and is a step ahead of the new restrictions on the marketing of HFC (Hydrofluorocarbon) refrigerants. All dryers use the new generation R513A fluid, an HFO (Hydrofluoroolefin)...
      See product sheet
    • More informations
      Reliability, simplicity, solidity Designed with technologies from the ACT series, the SMAX series make for a great air quality for industrial purposes, with minimum clutter.
      See product sheet
    • More informations
      Eco Green - True innovation Stop&Go technology Inspired from the automobile industry, the ACT serie’s cooling circuit was redesigned with a Start&Stop function which allows the dryer to be put on standby mode when the needs are below the nominal capacity. The resulting energy consumption is reduced, all the more so when the charge rate is...
      See product sheet
    • More informations
      Being more productive The PCD series refrigerated dryers are specially tailored to applications needing dry and cold air.With its stainless steel oversized plate heat exchanger, it lowers the compressed air temperature in one pass up to a temperature of +3ºC. The air distributed to the network is therefore guaranteed to have a temperature under +5ºC.This...
      See product sheet
    • More informations
      Medium pressure range The PLH series refrigerated dryers is designed for compressed air networks up to a pressure of 50 bars needing a pressure dew point of +3ºC.They are equipped with stainless steel plate heat exchangers. These heat exchangers offer a better resistance and take up less space than traditional ones.The cooling circuit is regulated by a...
      See product sheet
    • BYPASS kit including filters, hoses, valves and fittings for installation in 2 possible configurations.

      More informations
      The bypass kit system allows you to isolate the equipment to facilitate the maintenance of your dryers, filters and traps. The bypass kit is composed of 3 flexible hoses, valves and fittings in galvanized steel for installation in two possible configurations: at the tank outlet or at the refrigeration dryer outlet (EVO BLUE and SMAX).
      See product sheet
    • Refrigeration dryer with low Global Warming Potential fluid R513a Dew point +3°C6 models from 24 to 180 m³/h The RDRY-BLUE range is the new generation of refrigeration dryers at a very attractive price and with a low environmental impact.

      More informations
      Refrigeration dryer with low Global Warming Potential fluid R513a Reliability, Performance and AttractivenessDew point +3°C6 models from 24 to 180 m³/h Unrivalled competitiveness in the compressed air treatment market The RDRY-BLUE range is the new generation of refrigeration dryers at a very attractive price and with a low environmental impact.
      See product sheet
  • Adsorption dryers

    • More informations
      Regeneration without heat PARSEC adsorption dryers have been developed to meet the expectations of usersconcerned with obtaining compressed air that meets the most demanding quality criteria. By delivering a pressure dew point of -40 ° C, they effectively protect the majority ofindustrial processes including installations whose external networks are...
      See product sheet
    • More informations
      Compact and elegant design PRODRY adsorption dryers provide extremely low dew points to meet the most severeoperating conditions.Their modern and compact design allows them to integrate harmoniously into allinstallations, even the most demanding.An innovative detail, these dryers can be installed horizontally, which allows a significantsaving of space for...
      See product sheet
    • More informations
      Performance and robustness! EURODRY dryers, with regeneration without heat input, are designed to obtain very highquality air.They are suitable for applications where pressure dew points from -40 ° C to -70 ° C arerequired.Particularly robust and flexible to use, their implementation and operation are simple andinexpensive. Their pressure tanks, designed...
      See product sheet
    • More informations
      Optimal energy efficiency The MWE series of dryers is mainly intended for applications with 24 hour operation.It is particularly economical to use thanks to its internal heating system using multiple low-power heating elements per column.These resistances, out of contact with the desiccant, take place in finned tubes responsiblefor ensuring a homogeneous...
      See product sheet
    • More informations
      Without any loss of compressed air The DB series dryers, with regeneration by external heat input, achieve a very low dew pointwithout any consumption of compressed air.All dryers are fitted with butterfly valves to guarantee a total system pressure drop of lessthan 0.1 bar.Low pressure drop and no compressed air consumption are the two main advantages...
      See product sheet
  • Membrane dryers

    • More informations
      Static process, optimum efficiency PENTAIR series membrane dryers are designed for low-flow compressed air networks requiring a pressure dew point between +15 and -40°C. These dryers are completely static. They operate without a power supply and generate no condensate. Their compact size makes them particularly suitable for installation inside...
      See product sheet
  • Mini air dryer

    • More informations
      Mini dryer from 2 to 3 m3 / h for a dew point of -10 to -40 ° C! Specially designed for intermittent applications and / or low flow rates, the AP 31 mini dryer provides a very low dew point (typical value of -40 ° C). The air is dried during its passage through a desiccant bed whose function is to capture the molecules of water vapor. The desiccant has an...
      See product sheet