Refrigerated compressed air dryers avoid the presence of liquid water in pneumatic networks. They force moisture condensation by cooling the compressed air to a temperature of around + 3 ° C. At this stage the condensed water is evacuated from the network by an automatic trap. The dry compressed air is then reheated and distributed to the networ...
Refrigerated compressed air dryers avoid the presence of liquid water in pneumatic networks. They force moisture condensation by cooling the compressed air to a temperature of around + 3 ° C. At this stage the condensed water is evacuated from the network by an automatic trap. The dry compressed air is then reheated and distributed to the network. This dryer is by far the most used since the networks are not exposed to frost or if the use of compressed air does not require moisture contents lower than performance provided by this technology.
-
ACT-EVO series dryer
More informationsEVOlution The ACT-EVO series compressed air refrigerated dryers allow for an under pressure dew point of +3ºC, which suits most industrial installations.Designed using the best technologies, the ACT-EVO series dryers stand out of the market alternatives.With its integrated aluminium close-coupled heat exchanger, it was developped specifically for this...See product sheet -
EVO-BLUE dryer R513A
More informationsNew refrigerant with low climatic impact: R 513 A Designed and developed on the basis of the ACT-EVO dryers, the new EVO-BLUE range provides the answer to environmental concerns and is a step ahead of the new restrictions on the marketing of HFC (Hydrofluorocarbon) refrigerants. All dryers use the new generation R513A fluid, an HFO (Hydrofluoroolefin)...See product sheet -
SMAX refrigeration dryers
More informationsReliability, simplicity, solidity Designed with technologies from the ACT series, the SMAX series make for a great air quality for industrial purposes, with minimum clutter.See product sheet -
GPE GPV series energy saving dryers
More informationsEco Green - True innovation Stop&Go technology Inspired from the automobile industry, the ACT serie’s cooling circuit was redesigned with a Start&Stop function which allows the dryer to be put on standby mode when the needs are below the nominal capacity. The resulting energy consumption is reduced, all the more so when the charge rate is...See product sheet -
PCD series dryer - Cold and dry air at +5ºC
More informationsBeing more productive The PCD series refrigerated dryers are specially tailored to applications needing dry and cold air.With its stainless steel oversized plate heat exchanger, it lowers the compressed air temperature in one pass up to a temperature of +3ºC. The air distributed to the network is therefore guaranteed to have a temperature under +5ºC.This...See product sheet -
PLH series dryer - pressure up to 50 bar
More informationsMedium pressure range The PLH series refrigerated dryers is designed for compressed air networks up to a pressure of 50 bars needing a pressure dew point of +3ºC.They are equipped with stainless steel plate heat exchangers. These heat exchangers offer a better resistance and take up less space than traditional ones.The cooling circuit is regulated by a...See product sheet -
SMARD series dryers - Static condenser...
More informationsPerformant and silent ...with a concept developed specifically for the SMARD SC series.The static condenser doesn’t need a ventilator and thus functions very silently and is not prone to issues because of dust.Furthermore, the condenser isn’t sensitive to ambient temperature variations and needs no application of correction factors.Thanks to a constant...See product sheet -
Insulate the compressed air system -...
BYPASS kit including filters, hoses, valves and fittings for installation in 2 possible configurations.
More informationsThe bypass kit system allows you to isolate the equipment to facilitate the maintenance of your dryers, filters and traps. The bypass kit is composed of 3 flexible hoses, valves and fittings in galvanized steel for installation in two possible configurations: at the tank outlet or at the refrigeration dryer outlet (EVO BLUE and SMAX).See product sheet