All types of condensate drains for compressed air
Purge networks effectively
The compressed air upstream of the air dryer is saturated with humidity. As it travels through the pipes, the air cools and condenses this humidity. This process is accelerated in forced cooling installations (Final refrigerant, refrigeration dryer, etc.). A reliabl...
All types of condensate drains for compressed air
Purge networks effectively
The compressed air upstream of the air dryer is saturated with humidity. As it travels through the pipes, the air cools and condenses this humidity. This process is accelerated in forced cooling installations (Final refrigerant, refrigeration dryer, etc.). A reliable purge system is therefore necessary in order to extract this water (called condensate) from the network.
Timed solenoid valves
A compact programmer, installed between the connector and the coil, allows automatic control of the opening and closing of the valve. The purge interval and time are user adjustable.
Capacitive drains, with level detection
These latest generation traps have the advantage of adapting to the volumes of condensate generated and eliminating them without loss of compressed air. Their operation is entirely managed by the integrated electronics and does not require any adjustment on the part of the user.
Steam drains without power supply
For certain specific applications (Construction sites, A.D.F., electricity not available) this type of steam trap provides a reliable and suitable solution.
-
Capacitive drains level sensed
-
Condensate drain - CAPTAIR
For installations up to 6000 m³/ h ! CAPTAIR condensate drain operate using level detection technology.The volumetric condensate sensor, coupled with intelligent electronic logic, makes it possible to purge liquids without loss of compressed air.The evacuation is done through a robust 2/2 valve, direct action, and protected by a cleanable strainer...See product sheet -
Condensate drain - CAPTAIR COMPACT
Up to 10 m³/h CAPTAIR COMPACT is THE electronic level detection steam trap suitable for most pneumaticsystems.Small in size, it is designed to integrate with all the drain points in the network. With a heightof 74 mm it offers a compact solution with incomparable ease of installation and reliability.Made of a robust body in anti-corrosion treated...See product sheet -
Steam traps without feed - S-AIR
Magnetic condensate drain, level detection, without power supply. S-AIR is a trap specially designed to remove condensate from compressed air filters. Itreliably replaces float traps prone to frequent malfunctions.S-AIR does not require any power supply. Its operation is ensured by a powerful magneticactuator requiring no energy source.Its installation is...See product sheet -
Steam traps without feed - X-AIR
Pneumatic condensate drain, level detection, without power supply. X-AIR removes condensate from compressed air systems using a 3/2 valve pneumaticallyactuated by the level of condensate in the trap.X-AIR can be installed on all the purge points of compressed air networks (compressors,coolers, dryers, filters, tanks, etc.).Its installation is quick and...See product sheet -
Capacitive technology steam drain- 950 T
No unnecessary loss of compressed air! The 950 T condensate trap represents the new generation of economical and intelligenttraps.Equipped with internal sensors, it detects the presence of condensate and triggers the purgeuntil complete elimination of liquids.Small but powerful, it can remove up to 70 liters of condensate per hour.Its Viton diaphragm...See product sheet
-
-
Condensate drains by timed solenoid valve
-
Condensate drain - COMBO 230
These solenoid valves are controlled by a timer module allowing their operation to beadjusted to the volume of condensate to be removed.All timer modules have a manual function test as standardCombo 230"All-in-One" solenoid valve that incorporates a protective strainer and a shut-off valve.See product sheet -
Condensate drain - JC 35
These solenoid valves are controlled by a timer module allowing their operation to beadjusted to the volume of condensate to be removed.All timer modules have a manual function test as standardJC 35Robust solenoid valve for the evacuation of large volumes of condensate on compressors,final refrigerants, tanks ...See product sheet -
Condensate drain - VPF 37
These solenoid valves are controlled by a timer module allowing their operation to beadjusted to the volume of condensate to be removed.All timer modules have a manual function test as standardVPF 37Solenoid valve specially dedicated to condensate draining on pre-filters and oil separators.See product sheet -
Condensate drain - TEC-11
Compressed air condensate drain for dental filters and compressors TEC-11 removes condensate from filters for compressed air or dental compressors using asolenoid valve coupled to an electronic programmer.TEC-11 is extremely compact, can be easily installed under all types of filters, whatever theirsize or flow.The 2/2 direct acting valve with FPM seat...See product sheet -
Motorized valve drain - TEC-44
Motorized valve trap for heavily charged condensates The TEC-44 is a motorized valve trap specially developed for the evacuation of condensatesheavily loaded with solid particles.The TEC-44 is able to evacuate large volumes of condensate up to an operating pressure of40 bar.The valve has a large diameter passage diameter guaranteeing reliable evacuation...See product sheet -
Condensate drain - COMBO 230
These solenoid valves are controlled by a timer module allowing their operation to beadjusted to the volume of condensate to be removed.All timer modules have a manual function test as standardCombo 230"All-in-One" solenoid valve that incorporates a protective strainer and a shut-off valve.See product sheet -
Condensate drain - COMBO 230
These solenoid valves are controlled by a timer module allowing their operation to beadjusted to the volume of condensate to be removed.All timer modules have a manual function test as standardCombo 230"All-in-One" solenoid valve that incorporates a protective strainer and a shut-off valve.See product sheet -
Condensate drain - COMBO 230
These solenoid valves are controlled by a timer module allowing their operation to beadjusted to the volume of condensate to be removed.All timer modules have a manual function test as standardCombo 230"All-in-One" solenoid valve that incorporates a protective strainer and a shut-off valve.See product sheet
-