Condensate drain - VPF 37

See the choice of models
+ -

These solenoid valves are controlled by a timer module allowing their operation to be
adjusted to the volume of condensate to be removed.
All timer modules have a manual function test as standard
VPF 37
Solenoid valve specially dedicated to condensate draining on pre-filters and oil separators.

  • Reliable and economical steam traps.
  • Simple settings easily adjustable according to the volumes to be evacuated.
  • Interval between 2 adjustable purges.
  • Adjustable purge time (except VPF 37).
  • Integrated strainer and isolation valve (COMBO model only).
  • Manual operation test on all models.
  • LED indication of operation
  • Operating pressure up to 21 bar.
  • Passage diameter up to 10 mm.
  • Compatible with all compressor lubricants and all oil / water separators.

Model
 
Model My wish
VPF 37
Advise me

* Select the generic if you don't know which model to choose. The sales department will contact you to determine the appropriate model.

Timed solenoid valves are by far the most used on compressed air systems. Their low
investment cost, linked to excellent reliability, greatly contributed to this success.
VPF 37: Specially designed to advantageously replace automatic float traps for filters, which
are subject to blockage and frequent cleaning.

Detailed specifications

Inlet connection 1/8”
Outlet connection 1/8”
Internal passage diameter 2 mm
Min. operating pressure 0,2 bar
Max. operating pressure 16 bars
Min. ambient temp. 1°C
Max. ambient temp. 60°C
Min. opening time 2 Sec (fixed)
Max. opening time -/-
Min. interval between two drains 2 mins
Max. interval between two drains 120 mins
Manual drain test yes
Strainer and stopcock integrated no
Supply 220/1/50 Standard
Other optional voltages optional
Electric protection IP65 yes