COMPRESSED AIR - NITROGEN - CHILLER - MEASURE
PHENIX filters
| Manufacturer | Partenair |
| Categories | Compressed air treatment, Compressed air filters |
|
Water (Vapor)
|
Classe iso : 7
9876543210
|
|
Particles
|
Classe iso : 2
9876543210
|
|
Residual oil content (20°)
|
Classe iso : 3
9876543210
|
| Document to download | |||
| Documentation filtre dépoussièreur | 0200-PHENIX-BrochureA3 |
Dry particle filters - Grade D (1μm)
The PHENIX-D series dust filters are placed after adsorption dryers in order to stop dust from desiccant columns.
These micron filters make the air flow in the opposite direction: from the outside to the inside.
This collects the dust at the bottom of the bowl and removes it via the manual air vent.
To be installed after the adsorption dryer.
- Particle filtration up to 1μ (ISO Class 8573 = 2)
- Filter bowl with screw stop. Avoids overtightening, installation and removal without tools.
- New: Thanks to the QR Code on the filter, you can easily find the manual and certificates for your PHENIX filter!
- Manual drain as standard.
- Maximum efficiency, minimum pressure drop: up to 55% less pressure drop!
- Longer service life thanks to a specific pleating that increases the filtration area by 250% compared to a conventional element!
- Colour coding of the filter elements: red.
- Total internal and external corrosion protection by KTL Dip-Coating cataphoresis.
- Filters in compliance with Directive 14/68 for pressure equipment for group 2 gases.
- Design in accordance with ISO 12500.
- Manufacturing certified to ISO 9001.
- Silicone-free materials.
* Select the generic if you don't know which model to choose. The sales department will contact you to determine the appropriate model.
(*) Flow rates indicated according to ISO 7183 (20ºC and 1 bar absolute) under 7 bar relative
Pre-filtration 1µ
Their bodies, made of die-cast aluminium, are protected against corrosion by internal and external cataphoresis treatment.
The filter elements are equipped with an external pre-filtration layer made of polyester fibres, ultrasonically welded, offering much greater resistance and efficiency than traditional reticulated foam layers.
Detailed specifications
| Pression | Bars | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
| Facteur | x | 0.63 | 0.75 | 0.88 | 1 | 1.12 | 1.25 | 1.37 | 1.49 | 1.62 | 1.74 | 1.86 | 1.98 | 2.10 |
Correction factor depending on operating pressure
| Detailed specifications | PNX-D |
| Quality class according to ISO 8573-1:2001 | Particles: 2 |
| Particle filtration | 1μ |
| Compressed air temperature min/max | 1°C / 120°C |
| Maximum operating pressure | Depending on model |
| Pressure loss (initial) | 55 mbars |
| Maximum recommended pressure loss | 400 mbar |
| Element replacement frequency* | 8,760 h / 12 months |
| (*) For normal dusting and correct air quality. |
