COMPRESSED AIR - NITROGEN - CHILLER - MEASURE
PHENIX filters
| Manufacturer | Partenair |
| Categories | Compressed air treatment, Compressed air filters |
|
Particles
|
Classe iso : 1
9876543210
|
|
Residual oil content (20°)
|
Classe iso : 1
9876543210
|
| Document to download | |||
| Documentation filtre submicronique | 0200-PHENIX-BrochureA3 |
Oil separator filters - Grade S (0,01μm)
The PNX-S series submicron filters are designed for optimum filtration of oil and particles. They must be installed downstream of a PNX-M pre-filter.
The filter elements, which have a high coalescing power, have a draining outer layer of polyester fibres. This layer is ultrasonically welded and is much more resistant than traditional reticulated foam layers.
Indispensable for most compressed air production plants ! To be installed after the dryer in the case of refrigeration drying and after the PNX-M pre-filter in all other cases.
- Particle filtration up to 0.01μ and residual oil 0.01 mg/m3 at 20°C (ISO Class 8573 = 1 for oil and particles)
- Filter bowl with screw stop. Avoids overtightening, installation and removal without tools.
- New: Thanks to the QR Code on the filter, you can easily find the manual and certificates for your PHENIX filter!
- Trap can be dismantled from the outside! Easy removal and maintenance. (From PNX 120 upwards).
- High efficiency cyclone deflector. Design prevents water from returning to the line.
- Possibility of adapting timed and capacitive traps directly on the bulkhead passage.
- Total internal and external anti-corrosion protection by KTL Dip-Coating cataphoresis.
- Filters in compliance with Directive 14/68 for pressurised equipment for group 2 gases.
- Design in accordance with ISO 12500.
- Manufacturing certified to ISO 9001.
- Silicone-free materials.
* Select the generic if you don't know which model to choose. The sales department will contact you to determine the appropriate model.
(*) Flow rates indicated according to ISO 7183 (20ºC and 1 bar absolute) under 7 bar relative
Particles: > 99.99% at 0.01μ
Oil: 0.01 mg/m3 at 20°C
Elimination of liquid phases at the beginning of air treatment.
Detailed specifications
| Pression | Bars | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
| Facteur | x | 0.63 | 0.75 | 0.88 | 1 | 1.12 | 1.25 | 1.37 | 1.49 | 1.62 | 1.74 | 1.86 | 1.98 | 2.10 |
Correction factor depending on operating pressure
| Detailed specifications | PNX-S |
| Quality class according to ISO 8573-1:2001 | Particles: 1 |
| Residual oil: 1 | |
| Particle filtration | 0.01μ |
| Residual oil content at 20°C | 0.01mg/m3 |
| Compressed air temperature min/max | 1°C / 120°C |
| Maximum operating pressure | Depending on model |
| Pressure loss (initial) | 75 mbars |
| Pressure loss wet belt | 110 mbar |
| Maximum recommended pressure loss | 400 mbar |
| Element replacement frequency* | 8,760 h / 12 months |
| (*) For normal dusting and correct air quality. |
