Manufacturer | Partenair |
Categories | Compressed air treatment, Compressed air filters |
Liquid Water
|
Classe iso : 7
9876543210
|
Document to download | |
Documentation filtres FP RX1 |
FP-RX1 series micronic filters are specially designed for the filtration of dry particles in compressed air networks.
• filtration of particles up to 1µ (ISO class 8573 = 2)
• filtration for dry compressed air networks
• saturation indicator included
• interior and exterior anti-corrosion protection by electrophoretic coating (E-coat®)
• double o-ring seal eliminates risk of contaminant bypass for added security
• new lower filter bowl with smart stop, avoiding excessive tightening. Easier installation.
• compatible with mineral and synthetic oil
• Compatible with non-lubricated networks
• manual drain
• compliant with the 14/68 guideline concerning equipment under pressure for type 2 gases
• individually tested and serialized
• ISO 12500 compliant design
• ISO 9001 certified manufacturing
This product is no longer in stock
Availability date:
* Select the generic if you don't know which model to choose. The sales department will contact you to determine the appropriate model.
The most common application is the retention of fine particles of desiccants downstream of compressed air adsorption dryers.
All filter bodies are manufactured from cast aluminum alloy, are protected from corrosion through interior and exterior electrophoretic coating (E-coat®) and are coated with polyester of extremely resistant finish.
The ISO testings include an individual hydrostatic test and the affixing of a serial number for a complete traceability.
All filters are designed, tested and validated in compliance with the ISO 12500 international norm.
ISO 8573-1:2001 quality class | Particles : 2 |
Residual oil : 2 | |
Particle retention | > 99,99% at 1μ |
Residual oil content at 20°C | non-applicable |
Maximum compressed air temperature | 120°C |
Recommended compressed air temperature | 25°C max. |
Maximum operating pressure | 16 bars |
Initial average pressure drop | 75 mbars |
Maximum recommended pressure drop | 400 mbars |
FP 45 to FP 90 | Pop-up saturation indicator |
FP 130 to FP 2740 | Differential pressure gauge |
All models | Manual drain |
All models | drain test/filter depressurization |
FP 15 to FP 2740 | Mural fixation (optional) |
FP 15 to FP 2740 | Assembly kit (optional) |
FP 130 to FP 2740 | Dry contact pressure gauge (optional) |