COMPRESSED AIR - NITROGEN - CHILLER - MEASURE
Premium filters
| Manufacturer | Partenair |
| Categories | Compressed air treatment, Compressed air filters |
| Document to download | |
| Documentation filtres FP CAC |
0.003 ppm oil fumes at 20°C
Oil fumes are not stopped by coalescent filters. FP-CAC activated carbon filters are specifically designed to dispose of oil fumes as well as the taste and smell of the compressed air.
• filtration of particles up to 0,01µ (ISO class 8573 = 1)
• 0.003 ppm residual oil filtered at 20°C (ISO class 8573 = 1)
• interior and exterior anti-corrosion protection by electrophoretic coating (E-coat®)
• double o-ring seal eliminates risk of contaminant bypass for added security
• new lower filter bowl with smart stop, avoiding excessive tightening. Easier installation.
• compatible with mineral and synthetic oil
• Compatible with non-lubricated networks
• automatic drain with manual test and quick join for flexible tube
• compliant with the 14/68 guideline concerning equipment under pressure for type 2 gases
• individually tested and serialized
• ISO 12500 compliant design
• ISO 9001 certified manufacturing
* Select the generic if you don't know which model to choose. The sales department will contact you to determine the appropriate model.
n.b. These adsorption filters have a constant loss in pressure and are thus not equipped with a saturation indicator. Toxic gases aren’t disposed of (e.g. Co, Co2,...)
All filter elements are interlocking with a double o-ring seal. The highly adsorbant filtration media contains activated carbon specially selected for its selective performance on oils.
All filter bodies are manufactured from cast aluminum alloy, are protected from corrosion through interior and exterior electrophoretic coating (E-coat®) and are coated with polyester of extremely resistant finish.
The ISO testings include an individual hydrostatic test and the affixing of a serial number for a complete traceability.
All filters are designed, tested and validated in compliance with the ISO 12500 international norm.
Detailed specifications
| ISO 8573-1:2001 quality class | Particles : 1 |
| Residual oil : 1 | |
| Particle retention | > 99,99% at 0.01μ |
| Residual oil content at 20°C | 0.003 ppm |
| Maximum compressed air temperature | 50°C |
| Recommended compressed air temperature | 25°C max. |
| Maximum operating pressure | 16 bars |
| Initial average pressure drop | 75 mbars |
| Maximum recommended pressure drop |
N/A |
Equipments / Options
| FP 15 to 2740 | Manual drain |
| FP 15 to 2740 | Depressurization valve (by drain) |
| FP 15 to FP 2740 | Mural fixation (optional) |
| FP 15 to FP 2740 | Assembly kit (optional) |
