High pressure filters (stainless steel ranges)

See the choice of models
+ -
Manufacturer Partenair
Categories Compressed air treatment, Compressed air filters
Particles
Selon grade - Classe iso : 1 à 3
9876543210
Residual oil content (20°)
Selon grade - Classe iso : 1 à 4
9876543210
Document to download

All filtration grades up to 350 bar

5 series of filters available for filtration at a suitable price.


Aluminum ranges


2 ranges available for a maximum pressure of 20 and 50 bars.


Stainless steel ranges


3 ranges for pressures of 50, 100 and 350 bars.

These ranges include 6 filtration grades:

- Cyclonic separator, 25µ, 5µ, 1µ, 0.01µ, activated carbon.

  • 5 filtration grades available
  • Residual oil filtration up to 0.003 ppm at 20 ° C
  • Particle filtration up to 0.01 µ
  • 3 specific ranges (20, 100 & 350 bars)
  • 316 stainless steel body.
  • Low speed of passage through the filter elements to guarantee better performance
  • Compatible with mineral or synthetic oils.
  • Compatible with non-lubricated networks.
  • High pressure air vents available as an option.
  • Filters in accordance with Directive 2014/68 for pressure equipment for group 2 gases
  • Filters individually tested and serialized.
  • Design in accordance with ISO 12500.
  • ISO 9001 certified manufacturing.
Model
     
Model Input connection Flowrate (m³/h) My wish
C 025 AC ¼ 100
C 025 X1 ¼ 100
C 025 X5 ¼ 100
C 025 X25 ¼ 100
C 025 XA ¼ 100
C 037 AC 3/8 200
C 037 X1 3/8 200
C 037 X5 3/8 200
C 037 X25 3/8 200
C 037 XA 3/8 200
C 050 AC ½ 340
C 050 X1 ½ 340
C 050 X5 ½ 340
C 050 X25 ½ 340
C 050 XA ½ 340
Advise me    
Advise me    
Advise me    
Advise me    
Advise me    
Advise me    
Advise me    
Advise me    
Advise me    
Advise me    
Advise me    
Advise me    
Advise me    
Advise me    
350 HP 24 AC ¼ 48
350 HP 24 X1 ¼ 48
350 HP 24 X5 ¼ 48
350 HP 24 X25 ¼ 48
350 HP 24 XA ¼ 48
100 HP 24 AC ¼ 100
100 HP 24 X1 ¼ 100
100 HP 24 X5 ¼ 100
100 HP 24 X25 ¼ 100
100 HP 24 XA ¼ 100
100 HP 49 AC ½ 315
100 HP 49 X1 ½ 315
100 HP 49 X5 ½ 315
100 HP 49 X25 ½ 315
100 HP 49 XA ½ 315
350 HP 26 AC ¼ 111
350 HP 26 X1 ¼ 111
350 HP 26 X5 ¼ 111
350 HP 26 X25 ¼ 111
350 HP 26 XA ¼ 111
C 75 AC ¾ 500
C 75 X1 ¾ 500
C 75 X5 ¾ 500
C 75 X25 ¾ 500
C 75 XA ¾ 500
C 101 AC 1 1000
C 101 X1 1 1000
C 101 X5 1 1000
C 101 X25 1 1000
C 101 XA 1 1000
100 HP 75 AC ¾ 460
100 HP 75 X1 ¾ 460
100 HP 75 X5 ¾ 460
100 HP 75 X25 ¾ 460
100 HP 75 XA ¾ 460
350 HP 50 AC ½ 255
350 HP 50 X1 ½ 255
350 HP 50 X5 ½ 255
350 HP 50 X25 ½ 255
350 HP 50 XA ½ 255
C 150 AC 1700
C 150 X1 1700
C 150 X5 1700
C 150 X25 1700
C 150 XA 1700
C 200 AC 2 2040
C 200 X1 2 2040
C 200 X5 2 2040
C 200 X25 2 2040
C 200 XA 2 2040
100 HP 100 AC 1 680
100 HP 100 X1 1 680
100 HP 100 X5 1 680
100 HP 100 X25 1 680
100 HP 100 XA 1 680
350 HP 75 AC ¾ 510
350 HP 75 X1 ¾ 510
350 HP 75 X5 ¾ 510
350 HP 75 X25 ¾ 510
350 HP 75 XA ¾ 510
100 HP 101 AC 1 1200
100 HP 101 X1 1 1200
100 HP 101 X5 1 1200
100 HP 101 X25 1 1200
100 HP 101 XA 1 1200
C 201 AC 2 3400
C 201 X1 2 3400
C 201 X5 2 3400
C 201 X25 2 3400
C 201 XA 2 3400
100 HP 150 AC 1700
100 HP 150 X1 1700
100 HP 150 X5 1700
100 HP 150 X25 1700
100 HP 150 XA 1700
350 HP 100 AC 1 750
350 HP 100 X1 1 750
350 HP 100 X5 1 750
350 HP 100 X25 1 750
350 HP 100 XA 1 750
100 HP 200 AC 2 3400
100 HP 200 X1 2 3400
100 HP 200 X5 2 3400
100 HP 200 X25 2 3400
100 HP 200 XA 2 3400
350 HP 101 AC 1 1330
350 HP 101 X1 1 1330
350 HP 101 X5 1 1330
350 HP 101 X25 1 1330
350 HP 101 XA 1 1330

* Select the generic if you don't know which model to choose. The sales department will contact you to determine the appropriate model.

(*) Flow rates indicated according to ISO 7183 at 20 ° C and 1 Bar abs at nominal operating pressure.

(1) Filters supplied with drain plug. High pressure air vents available as an option.

(2) Maximum service temperature: 120 ° C except for AC grade: 25 ° C.

(3) Silicone-free manufacturing available on request (Contact us)

Ranges 50, 100 & 350 bars of 25 µ with activated carbon


An economical range


These filters for high working pressures use stainless steel bodies.

These filters meet the highest filtration and finishing requirements. They are perfect for applications in the food, pharmaceutical, chemical, petroleum industry ...

They have 5 different filtration grades to meet all applications.

Guaranteeing maximum safety, the ISO control procedures for these filters include an individual hydrostatic test, and the application of a serial number for full traceability.

All 25 HP and 50 HP series filters have been manufactured and tested according to the international standard ISO 12500.

Detailed specifications

Correction factor according to operating pressure (Series 50 bar)

Pressure Bars 4 6 8 10 15 20 30 40 50
Factor x 0,14 0,22 0,28 0,34 0,47 0,56 0,70 0,85 1

Correction factor according to operating pressure (Series 100 bar)

Pressure Bars 20 30 40 50 60 70 80 90 100
Factor x 0,45 0,57 0,68 0,8 0,84 0,88 0,92 0,96 1

Facteur de correction selon la pression de service (Série 350 bars)

Pressure Bars 50 100 150 200 250 300 350
Factor x 0,73 0,78 0,82 0,87 0,91 0,96 1