Manufacturer | Partenair |
Categories | Compressed air treatment, Dryers for compressed air circuits: refrigeration, adsorption, membrane dryers, Adsorption dryers |
Water (Vapor)
Dew point -20 à -70°C
|
Selon grade - Classe iso : 1 à 3
9876543210
|
Document to download | |
G100_Secheur_prodry |
PRODRY adsorption dryers provide extremely low dew points to meet the most severe
operating conditions.
Their modern and compact design allows them to integrate harmoniously into all
installations, even the most demanding.
An innovative detail, these dryers can be installed horizontally, which allows a significant
saving of space for certain confined configurations.
Their electronic controller incorporates as standard a light display of the cycle, maintenance
and possible faults. Remote signaling by dry contact is also provided as standard.
The range includes 17 models. It covers flow rates up to 365 m3 / h.
This product is no longer in stock
Availability date:
* Select the generic if you don't know which model to choose. The sales department will contact you to determine the appropriate model.
(*) Flow rates indicated at 1 bar 20 ° C according to ISO 1217
PRODRY adsorption dryers provide extremely low dew points capable of satisfying the most
extreme operating conditions and the most severe air quality.
The advanced control module has a serial interface for communicating with a remote
system, more efficiently managing power, operation and monitoring of functions.
An integrated solenoid valve, controlled by the module and controlled by the cycle, is
supplied as standard with each dryer in order to effectively purge the prefilter.
Quality class according to ISO 8573-1 Dew point –40 ° C / - 70 ° C) Dry particles (1µ) |
Water: Class 2/1 Solids: Class 2 |
Operating pressure Mini / Maxi |
4 / 16 bars |
Service temperature Mini. / Max. | 50°C |
Minimum temperature. / Max. compressed air | 10 / 50 °C |
Ambient temperature Mini / Maxi. | 5 / 50 °C |
Regeneration air flow | 15% |
Power supply | 12/24Vcc OR 100/240 Vac |
Power consumption (depending on voltage) | 11 à 22 W |
Average pressure drop at nominal |
0,2 bar |
Standard equipment
|
|
Prefilter + oil separator | 004 to 035 |
Integrated dry particle filters | All models |
Integrated dry particle filters | All models |
Vertical or horizontal installation | All models |
"Maintenance" and "error" indicator | All models |
Compressed desiccant cartridges | All models |
Optional equipment
|
|
Remote management of energy and parameters | All models |
Floor or wall mounting kits | 004 to 035 |
Any deviation from the nominal parameters results in the application of the correction
factors below.
Operating pressure | Bars | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
Correction factor | x | 0,62 | 0,75 | 0,87 | 1 | 1,12 | 1,25 | 1,37 | 1,5 | 1,62 | 1,75 | 1,87 | 2 | 2,12 |
Compressed air Temp. ºC | °C | 20 | 25 | 30 | 35 | 40 | 45 | 50 |
Correction factor | x | 1,07 | 1,06 | 1,04 | 1 | 0,93 | 0,78 | 0,64 |
Pressure dew point | °C | -20 | -40 | -70 |
Correction factor | x | 1,1 | 1 | 0,7 |