COMPRESSED AIR - NITROGEN - CHILLER - MEASURE
NG filters
| Manufacturer | Partenair |
| Categories | Compressed air treatment, Compressed air filters |
|
Particles
|
Classe iso : 2
9876543210
|
|
Residual oil content (20°)
|
Classe iso : 2
9876543210
|
| Document to download | |
| B115_Filtres_NG-CF |
Oil vapor and smell filtration
The CF series filters use adsorption to capture oil vapors present in the compressed air.
They are also recommended for eliminating smells and must be installed downstream of a prefilter + deoiler combination. Theoretically, that makes for a 100% filtration.
The range consists of 18 models covering flows of up to 17.500 cubic meters per hour und a pressure of 7 bars.
All filters come complete and with their filter element(s), a differential saturation indicator and, depending on models, and a manual drain.
• 0.003 ppm residual oil vapors filtered at 20°C (ISO class 8573 = 1)
• filters equipped with manual drains
• chrome-based anti-corrosion protection
• new patented venturi-wave™ technology, without turbulence
• filter elements with color code to avoid any inadvertent inversion
• compatible with mineral and synthetic oil
• Compatible with non-lubricated networks
• silicone-free filters, compatible with “air paint” applications
• compliant with the 14/68 guideline concerning equipment under pressure for type 2 gases
• ISO 9001 certified manufacturing
* Select the generic if you don't know which model to choose. The sales department will contact you to determine the appropriate model.
(*) Flow rates indicated according to ISO 7183 (20ºC and 1 bar absolute) under 7 bar relative
Absolute deoiling
The DELTECH NG CF series filters are designed to capture oil vapors still present downstream of a submicronic filter. They remove the smell and taste of compressed air: an essential point for the food industry (air in contact with food) or for breathable air.
The filters must be installed downstream of a submicronic filter. Efficiency is guaranteed for a concentration of upstream oil mist of up to 0.01ppm.
All filter bodies are made of aluminium protected against corrosion by a chrome based internal coating.
These filters work with adsorption and have a constant pressure drop and are thus not equipped with a saturation indicator with differential pressure reader.
Detailed specifications
| ISO 8573-1:2001 quality class | Particles : -/- Residual oil: 1 |
| Particle retention | -/- |
| Residual oil content at 20°C | 0,03 ppm |
| Maximum compressed air temperature | 55°C |
| Recommended compressed air temperature | 20°C |
| Maximum operating pressure | 16 bars |
| Initial average pressure drop | 70 mbars |
| Filter element replacement | 1000 hours of operation |
| Equipments / Options | Models |
| Pop-up saturation indicator | N/A |
| Differential pressure gauge | N/A |
| Automatic free float drain | All models |
| Manual drain | N/A |
| Purgeur Captair compact optionnel recommandé Captair compact drain recommended (option) | N/A |
| Mural fixation (optional) | All models |
| Assembly kit (optional) | All models |
| Dry contact pressure gauge (optional) | N/A |
Correction factor depending on operating pressure
| Pressure | Bars | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
| Factor | x | 0,62 | 0,75 | 0,87 | 1 | 1,12 | 1,25 | 1,37 | 1,5 | 1,62 | 1,75 | 1,87 | 2 | 2,12 |
