COMPRESSED AIR - NITROGEN - CHILLER - MEASURE
CLIN’AIR breathing air units
| Manufacturer | Partenair |
| Categories | Production of compressed breathing air |
| Document to download | |
| K125_Air_Respirable_CLINAIR |
Compliant with EN 12021 EUROPEAN PHARMACOPOEIA
The ambient air drawn in by the compressor contains quantities of pollutants which must be removed before this air can be used for breathing purposes.
Water, oil and particles are not the only ones among these contaminants.
Toxic gases, such as carbon monoxide (CO) and carbon dioxide (CO2) must be brought below the thresholds imposed by standard EN 12021.
This standard sets the values to be observed for the quality of the air supplied for use with respiratory protection devices (diving suits, hoods, mouthpieces ...).
The CLIN'AIR series breathing units, compact and simple to install, allow you to safely produce air quality in all respects in accordance with the European standards in force.
- Compliant with European and international standards for the quality of compressed breathing air.
- Compact units, fully assembled and tested.
- Purification on multi-adsorbent composite cartridges, facilitates maintenance operations.
- Eliminate CO and CO2 and other toxic gases below the imposed limit values.
- Dew point -65 ° C brought to atmospheric pressure.
- Simple and quick installation.
- Electronic dryer cycle control module with alarm report.
- Saturation and purge indicators by timed solenoid valve on prefilter and oil separator filter.
- Energy saver with cycle control according to dew point setpoint (available as an option)
- ISO 9001 manufacturing.
* Select the generic if you don't know which model to choose. The sales department will contact you to determine the appropriate model.
The units are supplied with separate upstream filtration (prefilter + oil separator).
These filters are equipped with differential pressure gauge and purge valve by timed solenoid valve.
Detailed specifications
| Pollutants | Standard NF-EN 12021 | CLIN'AIR treatments units |
| Residual oil | 0,5 mg/m³ | 0,003 mg/m³ |
| Particles | Threshold below the national exposure limit | Filtration > à 99,99% à 0.01µ |
| Water | Dew point 5 ° C below the lowest expected ambient temperature. If this temperature is not known, the imposed dew point is at least -11 ° C. | Dew point -40 ° C under pressure |
| CO | 15 ppm Maximum | < 5 ppm |
| CO2 | 500 ppm maximum | < 500 ppm |
