Water circulating refrigerant - Series A

See the choice of models
+ -
Document to download

For a controlled temperature


Series A final circulating water refrigerants offer remarkable efficiency and performance with
minimal footprint.
Water cooling allows, when the user has an adequate cooling water network, to maintain
controlled air temperatures throughout the year and not to be dependent on high summer
heat.
Thanks to the A series, lowering the compressed air temperature allows significant savings
on the selection and operating costs of compressed air treatment equipment.
The maximum inlet temperature of the compressed air at the inlet of the refrigerants is 120° C.

The outlet temperature is at most 10 ° C higher than the temperature of the cooling
water.

The range includes 14 models covering flow rates up to 4500 m3 / h at 7 bars.

  • Cooling of the compressed air at the compressor outlet.
  • Delivered air temperature reduced to water temperature + 10 ° C.
  • Accept up to 160 ° C as input.
  • Widely sized exchangers.
  • Copper harness with steel shell.
  • Supplied with condensate separator.
  • Protection by epoxy paint.
  • Construction complies with the pressure equipment directive (DEP 97/23).
  • ISO 9001 manufacturing.
Model
    Dimensions (en mm)   Réfrigérants finaux
Model Input connection Raccordement sortie ØG ØR Poids kg Débit d'air Débit d'eau : dm3/h My wish
A 1800 DN350 DN200 2" 2" 490 10800 22,2
A 2100 DN400 DN200 2 1/2" 2" 530 12600 27
A 30 1 1/2" 1 1/2" 1/2" 3/8" 18 180 0,5
A 60 2 1/2" 2 1/2" 3/4" 3/8" 29 360 0,75
A 80 2 1/2" 2 1/2" 3/4" 3/8" 38 480 1
A 140 DN100 DN100 1" 1" 49 840 1,7
A 250 DN100 DN100 1" 1" 115 1500 3,2
A 400 DN150 DN125 1 1/4" 1" 160 2400 5,2
A 500 DN175 DN125 1 1/4" 1" 210 3000 6.4
A 800 DN250 DN150 1 1/4" 2" 330 4800 10
A 1100 DN250 DN150 1 1/4" 2" 360 6600 11,5
A 1500 DN350 DN200 2" 2" 460 9000 19,5
Advise me              

* Select the generic if you don't know which model to choose. The sales department will contact you to determine the appropriate model.

(1) The water flows are given for 15 ° C at the inlet and 25 ° C at the outlet.
(2) Water pressure range: 3 bars minimum - 7 bars maximum.
(3) The refrigerants are supplied with a centrifugal separator but without a condensate trap
(To be selected from our range as required)

A series


'A series' final refrigerants are designed to lower the temperature of the compressed air at
the compressor outlet, or before any process requiring a controlled temperature.
They thus eliminate a large part of the contaminants (water and oil) present in significant
quantities when the air is at high temperature.
Lowering the compressed air temperature improves the efficiency of air treatment
equipment and avoids oversizing the dryers (by adsorption or refrigeration)
The compressed air circulates inside a bundle of smooth copper tubes contained in a steel
shell. Water is injected against the current outside these tubes where baffles allow passage
over the entire surface of the beam. The water thus extracts the calories present in the
compressed air and leaves the heated separator to be cooled again by the refrigeration
system (tower or central water).

Detailed specifications

Max. operating pressure (A 10 to A 30) 16 bars
Max. operating pressure  (A 40 to A 2100) 10 bars
Construction code (A 10 to A 30) DEP 97/23
Construction code  (A 40 to A 2100) CE 87/404
Max. compressed air temp. 150°C
Outlet compressed air temp. 10°C > water inlet temp.

Correction factor according to operating pressure

Pressure Bars 5 6 7 8 9 10
Factor x 0.75 0.88 1.00 1.06 1.12 1.17