Particulate filters for high temperatures

See the choice of models
+ -
Manufacturer Partenair
Categories Compressed air treatment, Compressed air filters
Particles
Selon grade - Classe iso : 1 à 3
9876543210
Document to download

Filtration up to 250 ° C


A range of filters in 316 stainless steel designed for the filtration of particles in air compresses up to 250 ° C.

These filters are available in 3 filtration grades:

- 5 microns, 1 micron and 0.01 micron.

The filter elements are specially designed to withstand high temperatures and are fitted with steel cups.

The range consists of 8 models covering flows up to 1150 cubic meters per hour under a pressure of 7 bars.

All filters are delivered complete with their filter element.

  • Stable and guaranteed efficiency up to 250 ° C
  • Filtration of solid particles only.
  • Efficiency up to 0.01µ
  • 100% stainless steel construction.
  • Filter elements with cups and stainless steel rod.
  • Low initial pressure drop and load.
  • Filters in accordance with Directive 97/23 for group 2 fluids.
  • ISO 9001 certified manufacturing.
Model
     
Model Input connection Flowrate (m³/h) My wish
HT 025 HRXA ¼ 35
HT 031 HRXA 3-8 52
HT 050 HRXA ½ 108
HT 075 HRXA ¾ 216
HT 101 HRXA 1 300
HT 150 HRXA 725
HT 200 HRXA 2 800
HT 201 HRXA 2 1150
Advise me    

* Select the generic if you don't know which model to choose. The sales department will contact you to determine the appropriate model.

(*) Flow rates indicated at atmospheric pressure (20 ° C and 1 Bar absolute).

(1) Construction: Stainless steel, without finishing coating.

(2) HT series filters are supplied without drain system.

(3) Drain connection: 1/8 "on models HT 25 to HT 50, 1/4" on higher models.

(4) Connections: parallel BSP according to ISO 7/1.

Filtration in extreme conditions


HT series filters are designed for the filtration of particles on compressed air networks where the temperature can reach 250 ° C.

They find in particular their application for the filtration of fine desiccant particles downstream of air dryers by adsorption with regeneration by calorific contribution.

Body, element cups and tie rods are made of grade 316 stainless steel making these filters insensitive to corrosion and most of the chemical attack.

8 models available, from 35 to 1150 m3 / h at 7 bar pressure.

Detailed specifications

Available filtration grades HRX5 HRX1 HRXA
Particles filtration 5 microns 1 micron 0,01 micron
ISO Class 8573-1 2001 (Particles) 3 2 1
Maximum temperature 250°C 250°C 250°C
Filter element cups Inox Inox Inox

Correction factor according to operating pressure

Pressure Bars 4 5 6 7 8 10 12 14 16
Factor x 0,76 0,84 0,92 1 1,07 1,19 1,31 1,41 1,51